Enable wireless transmission of industry standard DMX control protocol to any DMX enabled fixture or dimmer.Plug the receiver directly into the DMX connector of your fixture. With easy “one-button” linking DMXAir allows full reception of the entire 512 channels of one DMX universe. Power it up with internal rechargeable long-life battery or via any 5 Volt USB adapter.

Features

Control Your Fixtures Wirelessly
  • Intelligent Spread Spectrum frequency hopping with error correction
  • Industry Standard CRMX Technology with Lumen Radio
  • Secure internal shock proof antenna
  • 12 hour minimum run time on fully charged internal Lithium battery
  • Intelligent switching between USB and internal battery power
  • Auto power on when USB power applied
  • Plug directly into the fixture’s DMX port
  • Control one entire universe of DMX

Connect Your Fixtures Wirelessly with DMXAIR!

Check back frequently for updates on product availability.

Specifications

Instructions

  • Press and release the LINK button on the compatible transmitter.
  • While linking the STAT yellow LED indicator will flash rapidly for 5 seconds.
  • STAT will illuminate solid if valid DMX signal is received.
  • STAT will blink every 1 second if no valid DMX signal is detected.
  • The linking is maintained even when either transmitter, receiver or both  are powered off. Press and hold LINK button to unlink.